Surface Shields Zip N Close Zippers are no longer available, but we recommend Trimaco’s Adhesive Zipper
Create an instant dust barrier in high traffic areas of your jobsite with Surface Shields Zip N Close Zippers. These self adhesive zippers have a heavy duty backing to ensure that your area is completely contained. When used with dust barrier containment poles and plastic sheeting, the adhesive dust barrier system creates an accessible dust containment area to protect surfaces from dust and debris.
To use, simply remove the release paper, and slowly adhere the backing to plastic sheeting. Once in place, unzip the easy access dust barrier door zipper, and cut a slit though the entire length of the zipper opening. Zippers can be used from either side of the temporary wall. For a wider opening, use two self adhesive dust containment zippers. Explore more of Surface Shields dust containment and other surface protection products.
Let us find you a distributor or request a quote and we’ll provide pricing options right away. Surface Shields only sells through distribution.
| Available Colors | Blue , Red |
|---|---|
| Recyclable | No |
| Reusable | No |
| Material Type | Polyester |
| Breathable | No |
| Adhesive | Yes |
| Liquid Resistant | No |
| Flame Retardant | No |
What are Zip N Close Zippers used for?
Zip N Close Zippers are used to create an instant doorway to a dust containment system. The high adhesion level on the back of the zipper ensures that dust will not escape.
How long does it take to set up a door in a poly wall?
A Zip N Close system can make a door in about 30 sec to 2 min depending on experience and if you are making a single or double zipper door.
How do I install a Zip N Close Zipper?
Locate top of zipper. Peel the backing paper strip back a few inches. Firmly attach this portion of the zipper to the desired poly sheeting or other non-porous surface. Once securely attached, completely remove the backing paper while running your hand down the length of the zipper, pressing the zipper strip against the surface. Fully open (unzip) your Zip N Close zipper. Using a utility knife, cut completely through the length of the zipper opening, including the application surface. Do not cut the zipper.
Handling & Storage
Ensure good ventilation and exhaustion at the workplace. Keep respiratory protective devices available. Store in a cool location away from fire and heat. No special handling requirements.
