Multi Surface is a green hard surface protection film that keeps floors clean and damage–free during construction and renovation jobs. This heavy–duty self-adhering film does not shift and it is highly resistant to tears and punctures. This makes it an ideal surface protector for a wide range of surfaces including laminate, tile, marble and vinyl, factory–finished hardwood floors, countertops, bathtubs and sinks.
Multi Surface is liquid resistant and provides temporary surface protection for 30 days, leaving no adhesive residue when removed. This hard surface protection film is available in a variety of sizes. Apply Multi Surface easily with our durable film applicator. For more options, view Surface Shields entire line of surface protection products and carpet protection items.
Let us find you a distributor or request a quote and we’ll provide pricing options right away. Surface Shields only sells through distribution.
Available Colors | Green |
---|---|
Recyclable | Yes |
Reusable | No |
Material Type | Plastic |
Breathable | No |
Adhesive | No |
Liquid Resistant | Yes |
Flame Retardant | No |
Thickness 3.0 mil nominal
Film Low Density Polyethylene
Adhesive Type Formulated Acrylic
Adhesion Level 5-9 oz/in
Tensile Strength 3800 psi
Temperature (Ideal) 70° F
Humidity (Ideal) 50%
Elongation 470%
Chemical Name Acrylic PSA Tapes
Chemical Family Acrylic PSA Polyethylene Film
Chemical Formula Proprietary
Trade Name Multi Surface
Material Use Surface Protection
How do I install Multi Surface Film?
Peel back edge of Multi Surface and begin to unroll. Apply pressure from the edge of the protective film and work your way back so Multi Surface adheres. Continue rolling onto hard surface and smoothing down the film as you go. Carefully cut end with a sharp edge. When finished, you can either peel the edge of the film back against the roll to use at a later time or roll up the hard surface film and discard.
What can Multi Surface Film be used on?
Multi Surface protective film can be used on hard surfaces like tile, marble, VCT, laminate, and factory finished hardwood floors. Not recommended for hardwood floors that are not factory finished.
Handling and Storage
Store at room temperature and keep out of direct sunlight exposure. If Multi Surface is stored in extreme conditions (over 95° F or below 40° F) allow product to return to room temperature prior to use.