The perfect tool to protect carpeting along trim and baseboards. Quick Shield is easy to use and peels off cleanly, without leaving any residue. Use it to hold down tarps or on its own. It’s the most convenient solution to paint drips, spills, construction dust, dirt and moisture.
Let us find you a distributor or request a quote and we’ll provide pricing options right away. Surface Shields only sells through distribution.
Thickness: 2.5 mil nominal
Film: Low Density Polyethylene
Adhesive Type: Formulated Acrylic
Adhesion Level: 17-25 oz/in
Tensile Strength: 3000 psi
Temperature (Ideal): 70° F
Humidity (Ideal): 50%
Elongation MD: 600%
Chemical Name: Acrylic PSA Tapes
Chemical Family: Acrylic PSA Polyethylene Film
Chemical Formula: Proprietary
Trade Name: Quick Shield™
Material Use: Surface Protection
Peel back edge of Quick Shield™ and begin to unroll. Press down edge at beginning of area to be covered so Quick Shield™ adheres. Continue rolling onto carpet, applying pressure and smoothing down the film while doing so. Carefully cut end with a sharp edge. When finished, fold edge of the film back against the roll to use at a later time.
Do not apply to hardwood floors or other hard surfaces. Always test Quick Shield™ on a small portion of carpet that is in a non-exposed area. 72 hour test required for use over adhesive installations. Temporary protection for up to 30 days. Recommended for synthetic carpeting only. Apply only to dry carpet, do not use under damp conditions.
Can I use Quick Shield on my wood floor?
No, Carpet Shield was designed exclusively for carpet. We would recommend Multi-Surface Protection film for factory finished hardwood floors.