Take advantage of protecting multiple types of flooring and counter tops with just one roll of Multi Surface Protection film. It’s easy to use and comes in many sizes.
Let us find you a distributor or request a quote and we’ll provide pricing options right away. Surface Shields only sells through distribution.
Thickness 3.0 mil nominal
Film Low Density Polyethylene
Adhesive Type Formulated Acrylic
Adhesion Level 5-9 oz/in
Tensile Strength 3800 psi
Temperature (Ideal) 70° F
Humidity (Ideal) 50%
Chemical Name Acrylic PSA Tapes
Chemical Family Acrylic PSA Polyethylene Film
Chemical Formula Proprietary
Trade Name Multi Surface
Material Use Surface Protection
Peel back edge of Multi Surface and begin to unroll. Press down edge at beginning of area to be covered so Multi Surface adheres. Continue rolling onto hard surface are applying pressure and smoothing down the fi lm while doing so. Carefully cut end with a sharp edge. When finished, fold edge of the fi lm back against the roll to use at a later time. Removal: roll up Multi Surface and discard.
HANDLING AND STORAGE
Recommended for hard surfaces like VCT, laminate, and factory finished hardwood floors. Store at room temperature and keep out of direct sunlight exposure. If Multi Surface is stored in extreme conditions (over 95° F or below 40° F) allow product to return to room temperature prior to use. Not recommended for hardwood floors that are not factory finished.
SDS sheets for Surface Shields products available by request.