Tru Density: 3.3 kg/m3
Mullen Burst: 140 p.s.i.
Taber Stiffness: MD 1703.7 gf/cm
Taber Stiffness: CD 647.6 gf/cm
Low Spec: 44.01 Target Spec: 45.03 High Spec: 46.02
Low Spec: 140.90 Target Spec: 143.97 High Spec: 147.05
Low Spec: 4.05% Target Spec: 6.0% High Spec: 7.5%
Remove the plastic sleeve. Place on floor and unroll. Using a utility knife, cut to desired length. Seam multiple pieces using Builder Board™ tape for larger areas. Do not adhere Builder Board™ tape directly to flooring. An all-purpose or painter's grade blue tape with clean removal should be used for anchoring the board to floors.
What type of flooring does Builder Board protect?
Wood, concrete, marble, granite, travertine, terrazzo, stone, tile and carpet.
Is it possible to prevent this product from rolling back on itself prior to anchoring it down with tape?
All paper board floor protection products require a 'bend back' method during installation. Simply unroll Builder Board, grab the short end and bend it back, against its natural curl. This will remove any memory. Proceed with anchoring the board using a clean removal blue tape.