Thickness 2.0 mil nominal
Adhesive Type Water-based Acrylic
Adhesion Level 14.0 - 18.0 oz/in
Tensile Strength 2000-3000 psi
Temperature (Ideal) 70° F
Humidity (Ideal) 50%
Chemical Name Polyethylene / Acrylic
Chemical Family Polyethylene / Acrylic
Chemical Formula Proprietary
Trade Name Step N Peel
Material Use Surface Protection
Can I get my logo printed on the board?
Yes, we can custom print your logo, address, phone number, anything to get your name out there and help your business grow.
Do I have to keep buying the frame or can I buy refill packs?
At Surface Shields, we do believe in keeping waste to a minimum, you can buy refill packs and have 30 or 60 new tabbed sticky sheets.
Does the Step N Peel stick to the floor?
It has a non-slip backing, but does not have any adhesive on the back of the board.
Peel back edge of Step N Peel by the numbered removable tabs and tear off sheet. Repeat as necessary.
HANDLING AND STORAGE
Store at room temperature. Do not store in extreme conditions over 95° F or below 40° F.