Protect all types of ductwork with this adhesive duct protection film. Duct Cover Shield will not leave a residue on metal after removal and is highly resistant to punctures.
Let us find you a distributor or request a quote and we’ll provide pricing options right away. Surface Shields only sells through distribution.
|Available Colors||Blue , Clear|
Thickness 3 mil nominal
Film Low Density Polyethylene
Adhesive Type Water-based Acrylic
Adhesion Level 12.7 oz/in
Tensile Strength 2800 psi
Temperature (Ideal) 70° F
Humidity (Ideal) 50%
Elongation (%) 525%
Chemical Name Acrylic PSA
Chemical Family Acrylic PSA Polyethylene Film
Chemical Formula Proprietary
Trade Name Duct Cover Shield
Material Use Provides temporary closures
Peel back edge of Duct Cover Shield and begin to unroll. Press down edge at beginning of area to be covered so Duct Cover Shield adheres. Continue rolling onto area, applying pressure and smoothing down the film while doing so. Carefully cut end with a sharp edge. When finished, fold edge of the film back against the roll to use at a later time. Removal: roll up Duct Cover Shield and discard.
HANDLING AND STORAGE
Store at room temperature. If Duct Cover Shield is stored in extreme conditions over 95° F or below 40° F allow product to return to room temperature prior to use.
SDS sheets for Surface Shields products available by request.